SIB-V245 / V453 SCADA Interface
Mixed Input / Output Board

The Model SIB-V245 / V453 SCADA Interface Board is an external interface product which extends the ranges of the MotorolaTM ACE3600 Mixed I/O module's Discrete Inputs (DI). The 16 DI inputs can be separately set to monitor a low range of +/- 10 to 30VDC or 10 to 30VAC. A high range selection can monitor 120VAC. An LED on each DI indicates when an input is energized.

4 Discrete outputs (DO) are Form C (SPDT) pluggable relays. Each relay has an LED which indicates when the coil is energized.

4 Bipolar Analog Inputs (AI) provides test points which allow monitoring each of the four AI current signals without breaking the current loop. The AI also has transient suppressors which can be easily replaced in the field with a small screw driver.

A plug-in 120VAC to 24VDC, 350mA power supply is available. It can power the relay coils and excite the DI inputs.

The SIB slides into a plastic track. The track can mount on a DIN rail or mount on a flat surface.

All terminals are pluggable.

Cables to connect the SIB to the Mixed IO Module are available.

The SIB-V245 / V453 SCADA Interface Board carries a limited 3 year warranty. In the event of a failure due to defective material or workmanship, during the 3 year period, the unit will be repaired or replaced at no charge.

NOTE: Relays and Surge Arrestors are not covered by the warranty.