• Provides 3½ Digit Display Calibrated in Engineering Units (°F, °C, %, PSI, etc.)Proportional to DC Input
• USER RANGEABLE -32 mV to 256 VDC and 0.8 mA to 1 ADC
• Fits Standard 1/8 DIN Cutout (Oversize Bezel)
• Calibrate from Front of Control Panel
• Rated NEMA-4, Splashproof when Properly Installed
• 5 Year Warranty

The DIS471B-R provides a 3½ display proportional to a DC input signal. Span of the input is selected by a moveable jumper on the rear of the housing. The display controls are wide-ranging so that it can be calibrated to display engineering units. A complete set of engineering units labels is shipped with each DIS.

All controls for calibration of the display are accessible by removing a gasketed front access panel. DIS instruments are gasketed and, when properly installed, are NEMA-4 splashproof.

Terminations are made to a screw terminal connector on the rear of the case.

TYPICAL APPLICATINS
Monitor a process DC voltage or current and indicate the value of the process measurement in appropriate engineering units.