WILKERSON INSTRUMENT CO., INC.

MM4310 DC Input Low Input Span Isolated
Plug-In Mighty Module Transmitter

Wici Logo
Home Button Wilkerson Instrument Co.    800-234-1343 Wilkerson Instrument Co Blog PageWilkerson Instrument Co LinkedIn PageShopping Cart

MM4310

MM4310
DC Input
Low Input Span
Isolated
Plug-In
Mighty Module
Transmitter

$460.00

The following information must be entered to complete your order:
See "Specifications" below for Input and Output range limits.

Power:

Input:
Zero Scale
Full Scale
Units
Output: Zero Scale
Full Scale
Units

Quantity:

 

Don't Forget Your Accessories
DMP008 8-Pin Socket for Panel or DIN-Rail Mounting $20.00
Quantity:
Specifications
CLP1 Hold Down Assembly $20.00
Quantity:
Specifications
HKB-HK2D-8 Explosion Proof Housing With DMP008 Installed $325.00
Quantity:
Specifications
DR1 DIN-Rail, 35mm Symmetrical, 39 inches (1 meter) $25.00
Quantity:
Specifications
TRK48 PVC Snap-Track, 4 ft, for MP011 $30.00
Quantity:
Specifications
 
  • Features
  • Description
  • Specifications
  • Dimensions
  • Connections
  • Provides a Fully Isolated DC
  • Output Proportional to DC
  • Input
  • 10 mV Minimum Input Span
  • Unlimited* Choice of Input/ Output Ranges (Within specified range limits)
  • Choice of Power Options
  • 10 Year Warranty

The MM4310 provides a DC output, fully isolated from input, line power and ground, proportional to a DC input. It is useful in eliminating ground loops and common mode signals.

The MM4310 contains a superior input amplifier for narrow span inputs down to 10 mV.

All Wilkerson products are designed with RFI filters and lightning protection to reduce susceptibility to electrical noise and damage by lightning. It utilizes pulse width modulation to develop a pulse train with a duty cycle proportional to the input signal amplitude. This pulse train is coupled through a pulse trans former where the duty cycle data is converted to a proportional DC level in the output circuits.

TYPICAL APPLICATIONS
Eliminates ground loops and large common mode signals. Use for voltage / current scaling and conversion with isolation for buffering and noise reduction

INPUT RANGE
Voltage
select any range between ±20 V max
(min span 10 mV)
Current
select any range between ±5 A max
(min span 1 mA, internal shunt)

INPUT IMPEDANCE
Voltage: 200 kilohms
Current:

Input Input Shunt Value
1 mA
10 mA
20 mA
4/20 mA
100 mA
1 A
5 A
100 Ohm
10 Ohm
5 Ohm
61.9 Ohm
1 Ohm
0.1 Ohm
0.01 Ohm

OUTPUT RANGE
Voltage
select any range from -10 V to +15 V, 10 mA max load
(min span 0.2 V)
Current
select any range from 0 to 50 mA max,
> 24 V compliance (1200 ohms max at 20 mA)
18 V compliance if full-scale output > 20 mA

ISOLATION
Breakdown, Output / Input > 500 megohms > 1000 VAC rms  
Breakdown, Power / Circuitry > 1500 VAC rms

RESPONSE TIME
< 100 ms  (Range Dependent)

ACCURACY
±0.1% of span

LINEARITY
±0.05% of span

COMMON MODE REJECTION
120 dB, DC to 60 Hz

OPERATING TEMPERATURE
14°F to 140°F
-10°C to 60°C

TEMPERATURE STABILITY
±(0.02% of span +1.3 uV)/°Cmax

POWER
115 VAC ±10%, 50/60 Hz (2.5 W max)
230 VAC ±10%, 50/60 Hz (2.5 W max)
(DC Power Option)
24 VDC (limits 21-32 VDC ) (2.5 W max)
12 VDC (limits 10-16 VDC) (2.5 W max)

Isolation, DC power supply to input common: 10 megohms

Mighty Module Dimension Drawing

PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN 7
PIN 8
Power Supply +
No Connection
Power Supply -
No Connection
Input +
Input -
Output +
Output -
Specifications    Manual

Solutions Provider for Signal Conditioning and
Process Control Instrumentation