MM4010 Order Page

MM4010

MM4010
DC Input
Non-Isolated
Plug-In
Mighty Module
Transmitter

$270.00

The following information must be entered to complete your order:
See "Specifications" below for Input and Output range limits.

Power:
Input:	Zero Scale	Full Scale	Units
Output:	Zero Scale	Full Scale	Units

Don't Forget Your Accessories
DMP008	8-Pin Socket for Panel or DIN-Rail Mounting	$20.00	Specifications
CLP1	Hold Down Assembly	$20.00	Specifications
HKB-HK2D-8	Explosion Proof Housing With DMP008 Installed	$325.00	Specifications
DR1	DIN-Rail, 35mm Symmetrical, 39 inches (1 meter)	$25.00	Specifications
TRK48	PVC Snap-Track, 4 ft, for MP011	$30.00	Specifications

Features
Description
Specifications
Dimensions
Connections

Provides DC Output Proportional to DC Input
NOT Isolated (for Isolated I/O use MM4380A, MM4300 or MM4300A)
50 mV or 1 mA Minimum Input Span
Unlimited Choice of Input / Output Ranges (Within specified range limits)
Choice of Power Options
10 Year Warranty

The MM4010 provides a DC Output voltage proportional to a DC input signal. It is useful in converting a voltage to a current, a current to a voltage, or for scaling signal levels from one amplitude to another.

All Wilkerson products are designed with RFI filters and lighting protection to reduce susceptibility to electrical noise and damage by lightning.

TYPICAL APPLICATIONS
Voltage/current scaling or level conversion, buffering, noise reduction.

INPUT RANGE
Voltage select any range between ±10 V max**
Current select any range between ±5 A max (min span 1 mA)

INPUT IMPEDANCE
Voltage 200 kilohms
Current

Input Value	Input Shunt Value
1 mA 10 mA 20 mA 4/20 mA 100 mA 1 A 5 A	100 Ohm 10 Ohm 5 Ohm 61.9 Ohm 1 Ohm 0.1 Ohm 0.01 Ohm

OUTPUT RANGE
Voltage select any range from - 10 V to +15 V,
10 mA max load (min span 0.2 V)
Current select any range from 0 to 50 mA max,
> 24 V compliance (1200 ohms max at 20 mA)

ISOLATION
Breakdown, Power / Circuitry > 1500 VAC rms

RESPONSE TIME
(Range Dependent) < 100 ms
WR < 200 ms

ACCURACY
±0.1% of span

LINEARITY
± 0.01% of span

COMMON MODE REJECTION
120 dB, DC to 60 Hz

OPERATING TEMPERATURE
14°F to 140°F/-10°C to 60°C

TEMPERATURE STABILITY
±(0.02% of span + 30 uV)/°C max

POWER
115 VAC ±10%, 50/60 Hz (2.5 W max)
230 VAC ±10%, 50/60 Hz (2.5 W max)
(DC Power Option)
24 VDC (limits 21-32 VDC) (2.5 W max)
12 VDC (limits 10-16 VDC) (2.5 W max)

Isolation, DC power supply to input common: 10 megohms.

** For input values greater than ±10V use MM4300 fixed-range or MM4380A wide-ranging isolated transmitter

Mighty Module Dimension Drawing

PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN 7
PIN 8

Power Supply +
No Connection
Power Supply -
No Connection
Input +
Input -
Output +
Output -

Specifications Manual

WILKERSON INSTRUMENT CO., INC.

MM4010 DC Input Non-Isolated Plug-In Mighty Module Transmitter

Input:

MM4010 DC Input Non-Isolated
Plug-In Mighty Module Transmitter