LP400 Order Page

LP400

LP400
Loop Powered
Process Indicator
3.5 Digit Display

$425.00

We will calibrate this field rangeable product to your specifications at no charge. It can be changed in the field if desired.

The following information must be entered to complete your order:
See "Specifications" below for Input and Display range limits.

Input:
	Display Action
Display:	Zero Scale	Full Scale	Units (Optional)

Don't Forget Your Accessories
PMK400	Pipe Mount Kit for LP400	$50.00	Specifications

Features
Description
Specifications
Dimensions
Connections

Provides 3½ Digit Liquid Crystal Display (LCD) Proportional to a Process Loop Current
Loop Powered
Easy-to-Read 0.8" Digits
Trailing Dummy Zero (±19990)
Switch-Selectable Engineering Units / Loop Current Display
Splashproof and Corrosion Resistant Housing
5 Year Warranty

The LP400 Loop Powered Display provides digital indication of a 4/20 mA or 10/50 mA process loop signal. The display takes its operating power from the loop current and requires no other source of power.

Wide-ranging zero and span adjustments plus switch selectable decimal point location and trailing zero allow the display to be calibrated in engineering units. A front panel Engineering Units/Loop Current switch permits a quick check of the process signal without recalibration.

Designed for field mounting, the LP400 is splashproof and corrosion resistant and operates from -40 to 185°F (-40 to 85°C). The circuit board is conformal coated for protection from humidity and contamination. Optional accessories include a pipe mounting kit.

TYPICAL APPLICATIONS
Displaying process variables where line power is NOT available.

INPUT RANGE
4/20 mA or 10/50 mA

INPUT VOLTAGE DROP
3.5 V max. (equivalent to 175 ohms at 20 mA or 70 ohms at 50 mA)

ACCURACY
±(0.05% of reading plus 1 digit)

DISPLAY
Digit Size
0.8" LCD, 3½ digits, ±1999
Switchable Decimal Points and Trailing Zero ±1.9.9.9 0
Control Range
Zero ±1999
Span (full scale minus zero) min span 10/max span 3998
Update 3/sec

DISPLAY SWITCH
Allows quick check of loop current (400/1999 or 100/500)
Decimal point remains in engineering units position

OPERATING TEMPERATURE
-40°F to 185°F/-40°C to 85°C

TEMPERATURE STABILITY
±(0.01% of span plus 0.01% of display zero offset)/°C

POWER
Supplied by input current no separate power required

HOUSING
Splashproof and corrosion resistant

LP400 Dimension Drawiing

PIN +
PIN -
PIN Center Pins

Input +
Input -
Tie Points

Specifications Manual

WILKERSON INSTRUMENT CO., INC.

LP400 Loop Powered Process Indicator 3.5 Digit Display

Input:

LP400 Loop Powered Process Indicator
3.5 Digit Display