DM7010 Order Page

DM7010

DM7010
Frequency Input
DIN-Rail Mounted
Field Rangeable
Isolated Output Transmitter

$455.00

We will calibrate this field rangeable product to your specifications at no charge. It can be changed in the field if desired.

The following information must be entered to complete your order:
See "Specifications" below for Input and Output range limits.

Power:
Input:	Zero Scale	Full Scale	Units
Output:

Don't Forget Your Accessories
DR1	DIN-Rail, 35mm Symmetrical, 39 inches (1 meter)	$25.00	Specifications

Features
Description
Specifications
Dimensions
Connections

Spans from 10 Hz to 50 KHz
Selectable Response Time & Filter
Plug-In Terminal Blocks
Standard DIN-Rail Mount with Easy Snap-On Snap-Off
User-Settable Input and Output Ranges
Fully Labeled Jumper Positions for Easy Range Settings
User Write-On Label
Connections and Ranging Readily Accessible from the Front
Choice of Power Options
Permanent Warranty

The DM7010 is a field rangeable frequency input signal conditioner. It provides several choices of voltage or current ouputs proportional to the frequency of the input. A Normal – Reverse selection is available which reverses the output signal logic (ie 20 - 4mA vs 4 - 20mA). The input is galvanically isolated from the output and power source.

Response time can be set by the user with a selection of jumpers on the front panel. The wide input voltage range allows the product to be used with low level magnetic pickups, for flow or speed applications, as well as digital signals or direct power line monitoring.

A selectable pull-up resistor allows the product to be driven from a switch closure or open collector transistor. It will also accept CMOS or TTL digital inputs.

The DM7010 is housed in an aluminum case with a stainless steel DIN rail mount. The terminals on the front are pluggable, for ease in wiring. The snap-on front cover has a write-on label.

Several power input options are available.

TYPICAL APPLICATIONS
Typical applications for the DM7010 are monitoring flow, conveyor speed, power line frequency on portable generators, and motor rotation speed.

INPUT
Frequency Range 10 Hz to 50 kHz
Impedance 100,000 ohms
Coupling AC
Voltage range 50 mV to 700 V p-p
Span Select (User settable)
12, 25, 50, 100, 200, 400, 800, 1600, 3200, 6400,
12500, 25000 and 50000 Hz
Span adjustment +5%, -55% of selected span
Zero adjustment ±30% of selected span
Offsets (User settable)
None
Pull-Up Resistor
4.7 kilohm (+5 VDC)

PEAK/RMS + 6.3

OUTPUT

Voltage
0/.25 V
0/1 V
1/5 V
0/5 V
0/10 V
-5/+5 V
-10/+10 V

Current
0/1 mA
0/4 mA
4/20 mA
0/20 mA

OUTPUT LOGIC
Normal or Reverse Acting

ACCURACY
0.1% of span

STEP RESPONSE TIME
see FILTER CAPACITOR SELECTION CHART

RIPPLE (peak-to- peak)
see FILTER CAPACITOR SELECTION CHART

LINEARITY
±0.01% of span

COMMON MODE REJECTION
120 dB DC to 60 Hz

ISOLATION, OUTPUT / INPUT
>500 megohms

BREAKDOWN, OUTPUT TO INPUT
>1000 volts RMS sinewave

BREAKDOWN, POWERCIRCUITRY
>1500 volts RMS sinewave

OPERATINGTEMPERATURE
-13° to 140°F (-25° to 60°C)

TEMPERATURE STABILITY
±(0.01% of span)/°C

POWER
Wattage 2.5 W max
AC Options
115 VAC ±10%, 50/60 Hz
230 VAC ±10%, 50/60 Hz
24 VAC ±10%, 50/60 Hz
DC Options
12 VDC nominal (10 to 15 VDC)
24 VDC nominal (21 to 28 VDC)

FILTER CAPACITOR SELECTION CHART
FREQUENCY SPAN SETTING	MINIMUM CAPACITOR* SETTING FOR LESS THAN 0.1% RIPPLE PEAK-PEAK		MINIMUM CAPACITOR* SETTING FOR LESS THAN 0.5% RIPPLE PEAK-PEAK
HERTZ	CAPACITOR (uF)	RESPONSE TO 99% (SEC) *	CAPACITOR (uF)	RESPONSE TO 99% (SEC) *
12	2.2	110	1.0	50
25	2.2	110	1.0	50
50	1.0	50	0.47	24
100	1.0	50	0.47	24
200	0.47	24	0.47	24
400	0.47	24	0.1	5
800	0.47	24	0.047	2.4
1600	0.1	5	0.047	2.4
3200	0.047	2.4	0.047	2.4
6400	0.047	2.4	0.01	0.5
12500	0.01	0.5	0.0047	0.24
25000	0.01	0.5	0.0047	0.24
50000	0.0047	0.24	0.001	0.05

DIN Mod Series Dimension Drawing

Terminal 1
Terminal 2
Terminal 3
Terminal 4
Terminal 5
Terminal 6
Terminal 7
Terminal 8

Input +
Input -
Shield
No Connection
Output +
Output -
Power AC L1 or DC +
Power AC L2 or DC -

Specifications Manual

WILKERSON INSTRUMENT CO., INC.

DM7010 Frequency Input DIN-Rail Mounted Field Rangeable Isolated Output Transmitter

Input:

DM7010 Frequency Input DIN-Rail Mounted
Field Rangeable Isolated Output Transmitter